Motor Control Center
Model: CM2
Staggered start of 3 motors, rotation change of 2 motors, start with soft-start, start with variator. Starting a and b by means of a relief system and plc. Protections for control circuits.
Want to inquire about the Motor Control Center?
Specifications
- Height: 1.2m
- Width: 0.8m
- Depth: 0.4m
- Current: 50 amps
- Voltage: 240VAC
- System: 3 Phases Frequency: 60Hz
- 1 3 x 50A main switch with trip coil.
- 1 15-inch TFT LCD HMI touch screen. With connection capacity to industrial Ethernet, profibus, MPI Resolution 1200 x 800 pixels, two USB ports and two SD memory slots.
- 1 8A power supply.
- 1 8 x 10/1000 Mbit/s RJ45 Switch
- 1 Modem for control and monitoring through mobile phone network.
- 1 industrial Access Point for local wireless network.
- 1 PLC with integrated profibus and ethernet interface.
- 1. built-in RS485 port and 3 RJ45 ports.
- Integrated color HR display. Ability to display alarms, failures of hardware and software 32 digital inputs 24 VDC 32 digital outputs 24 VDC. 8 analog inputs with 16-bit resolution for voltage, current, RTD, and thermocouple 4 analog outputs with 16-bit resolution for voltage and current.
- Integrated web server.
- AC-3 contactors for power circuit of 2 HP motors with their respective thermal relays Auxiliary relays for control with PLC
- Red, green and white LED type indicator lights with ethernet connectivity for the controls.
- NO and NC pushbuttons with ethernet connectivity, necessary for the control commands.
- 1 Emergency Switch.
- Professional programming software under 64-bit Windows system for all programmable devices inside the cabinet.
- Programming cables between PC and equipment.
- Communication cables through protocol between equipment.
- Operation manuals.
- A variable speed drive with communication for industrial ethernet, 2 inputs and 2 analog outputs from 0 to 10 VDC/4-20mA.
- A control 24V AC/DC softstarter with 2HP of power and Ethernet communication.
- A double contact mushroom type emergency switch.
- Independent motor protectors for each type of starter Connection diagrams of all the elements contained in the motor control center.
Motor Control Center Data Overview
R3 | ||||
---|---|---|---|---|
Weight | 20kg | |||
Material | Steel | |||
Construction type | Standard | |||
Data sheet | Link |
ÖsterrTech